大型转子—基础—土壤系统的动力分析

本文对大型汽轮发电机组-基础-土壤系统采用模态综合技术进行了动力分析.用弹性半空间理论建立土壤的模型,基础底板则通过弹性薄板的李兹(Ritz)函数近似解的形式来描述.用三维梁单元来建立基础底板以上的框架结构和转子系统的运动方程.此外,还用模态应变能的相对大小,在这种复杂机械结构系统存在的众多固有频率中,区分出哪些是属于主要为转子系统的固有频率,称为“重要振动固有频率”,以确定系统的临界转速.最后,对引进的一台500MW汽轮发电机组的动力特性进行了分析.     

Analytical dynamics of continuous medium and its application

综述了国内和国外学者研究连续介质分析动力学问题的进展,阐明了本文主要论述将Lagrange方程应用于连续介质动力学的问题.论文采用Lagrange-Hamilton体系,分别论述了非保守非线性弹性动力学、不可压缩黏性流体动力学、黏弹性动力学、热弹性动力学、刚--弹耦合动力学和刚--液耦合动力学的Lagrange方程及其应用.论述了应用Lagrange方程建立有限元计算模型的问题. 最后,展望了将Lagrange方程应用于连续介质动力学问题的研究前景.     

Generation of beams of three-dimensional periodic internal waves by sources of various types

The energy and force characteristics of periodic internal wave beams in a viscous exponentially stratified fluid are analyzed. The exact solutions of linearized problems of generation obtained by integral transformations describe not only three-dimensional internal waves but also the associated boundary layers of two types. The solutions not containing empirical parameters are brought to a form that allows a direct comparison with experimental data for generators of various types (friction, piston, and combined) of rectangular or elliptic shape. The stress tensor and force components acting on the generator are given in quadratures. In the limiting cases, the solutions are uniformly transformed to the corresponding expressions for the problems in a two-dimensional formulation. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 3, pp. 12–23, May–June, 2006     

Application of X-ray diffraction, micromagnetic and hole drilling methods for residual stress determination in a ball bearing steel ring

A basic understanding of distortion problems requires the analysis of a complete manufacturing process including an almost complete overview of residual stress states in the component during each production step. To reduce the measurement time in the future, three measurements methods (X-ray diffraction, micromagnetic and blind hole drilling methods) have been used to analyze residual stress states in machined AISI 52100 ball bearing rings. X-ray diffraction was used as a state-of-the-art method for machining induced residual stresses with pronounced gradients. The ring exhibited a complex residual stress state with high tensile residual stresses at the surface, a strong gradient in depth, and also showed some variation along the outer circumference due to a superimposition of machining induced residual stresses and effects from the clamping device process. Due to this surface state, micromagnetic signals depend on the analyzing frequency. A calibration of the signals was only possible with the X-ray diffraction data. The results of the three different measurement methods correlate reasonably well.     

弱界面异质球形夹杂本征应变问题的解析解

本文研究了具有线弹簧弱界面的异质球形夹杂的本征应变问题，所采用的线弹簧界面模型既能界面的切线方向滑动，又能考虑界面的法线方向张开，根据叠加原理、原问题的弹性场可分成三部分；二部分由真实均匀本征应变所引起，另一部分由等效的非均匀本征应变所引起，后一部分则由虚拟的Ｓｏｍｉｇｌｉａｎａ位错场所产生。本文求得了等效非均匀本征应变和虚拟位错场的Ｂｕｒｇｅｒ矢量的解析表达式，进而确定的问题的弹性场。     

用有限解析差分格式数值求解化学输运方程

本文用有限解析差分格式研究在多孔介质中化学输运问题的数值模型,系统地计算结果表明:1.有限解析差分格式能够消除数值弥散和伪振荡; 2.随着弥散数(Peclct数)的减小(增加),浓度突破曲线将延迟到达和形状变陡,最终趋近浓度对流曲线;3.当流速数增加后,非稳态吸附对浓度分布的影响趋近稳态吸附的影响。     

Interaction between Low and High-Frequency Modes in a Nonlinear System: Gas-Filled Cylinder Covered by a Movable Piston

A simple mechanical system containing a low-frequency vibration mode andset of high-frequency acoustic modes is considered. The frequencyresponse is calculated. Nonlinear behaviour and interaction betweenmodes is described by system of functional equations. Two types ofnonlinearities are taken into account. The first one is caused by thefinite displacement of a movable boundary, and the second one is thevolume nonlinearity of gas. New mathematical models based on nonlinearequations are suggested. Some examples of nonlinear phenomena arediscussed on the base of derived solutions.     

有限尺寸多钉连接件钉传载荷计算的解析方法

提供一种确定多钉连接件中钉传载荷的解析方法，这个方法将被连接件看作弹性体，以经典结构力学以及弹性理论平面问题复变函数解法为基础，建立了求解钉传载荷的线性代数方程组并给出了若干算例。这个方法不仅具有合理的力学模型，而且具有计算的简捷性与适用的广泛性。     

Some features of the buckling of stringer shells

A technique for stability analysis of stringer shells is proposed. It is used to analyze the minimum critical stresses. The dependence of the dimensionless parameters σ_cr/σ_cl on the number of stringers is plotted. The linear and nonlinear theories of ribbed shells are used to examine the features of how stringer shells lose stability. It is shown that the minimum critical stresses determined using the theory of ribbed shells and a structurally orthotropic model are close within the range of stiffness parameters considered __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 2, pp. 59–64, February 2006.